Electronic Proof Tracking Test Apparatus , Cti Tracking Index High Voltage Flammability Test
Application
The leakage tracking tester meets the GB/T4207 test standard. A rectangular platinum electrode was used, and the force of the two poles on the sample was 1.0 N; 0.05 N, respectively. The applied voltage is adjustable between 100 and 600V (48-60Hz), and the short-circuit current is 1.0; 0.1A, the voltage drop should not exceed 10%. When the short-circuit leakage current is equal to or greater than 0.5A in the test circuit, the time is maintained. 2 seconds, the relay is activated, the current is cut off, indicating that the test piece fails. The time constant of the drip device is adjustable, and the amount of drip is controlled to be 44 to 50 drops/cm3 and the time interval between drops is 30 seconds.
Main technical specifications
1. PWM temperature control. It can control :
(1) Water temperature in chamber during water immersed wheel track test
(2) Ambient temperature of constant temperature chamber at a time.
2. The constant temperature chamber adopts outside circulatory heating mode.
The uniformity and stability is good. No overshoots.
3. It shows time- displaceme
nt curves and time- temperature curves during a test.
4. It equips an absolute temperature sensor. No temperature drift in a long time test.
5. The mechanical structure adopts wheel movement mode.
6. One wheel tester. It can determine both water immersion test or no water immersion test.
5201A electric leakage mark tester
Model:5201A
Accord with standard:GB4207 IEC60112
Technology Data:
1.) controller:7 inch programmable controller
2.) electrical pressure display:digital voltmeter
3.) electrical current display:digital current meter
4.) dimensions:1120w*600d*1020h
5.) inner volume: ≥0.5cubic
6.) electrode material:platinum
7.) electrode size:2*5*35mm
8.) electrode pressure:1.00N
9.) electrode distance:4.0mm
10.) drop volume:50 drop/1cubic meter
11.) drop height:35mm (can be adjustable)
12.) drop time:30s+-0.1(can be setted)
13.) drop number:1~9999(can be setted)
14.) test voltage:50v~600v(can be adjustable)
15.) power supply voltage drop:1.0A+-0.1A<8%
16.) mark judgment:0.5A+-0.05A
Features:
1.) 7 inch touch screen control system
2.) digital display voltmeter
3.) digital display current meter
4.) imported micro drop pump
5.) liquid drop time and volume control precision
6.) test qualifid ,inqualified judgment function
7.) door open/close protect system
8.) overvoltage protect system
9.) full operation protect system
10.) tempered glass window
Main configure:
1.) standard electrode *1
2.) imported micro pump *1
3.) explosion prevent tempered glass *2
4.) standard liquid *1
5.) standard ruler *1
| dimensions | 1120w*600d*1020h |
| inner volume | ≥0.5cubic |
| electrode distance | 4.0mm |
| test voltage | 50v~600v |
Product Tags:
|
|
Electronic Proof Tracking Test Apparatus , Cti Tracking Index High Voltage Flammability Test Images
|
